User guide

414 Chapter 15 Introduction to MIDI Editing
To stop hung notes:
m Double-click on the MIDI Activity display in the Transport bar (or use the Send Discrete
Note Offs key command).
Separate Note Off messages will be sent for every note, on all channels of every MIDI
port, which should do the trick!
To stop unwanted modulation:
m Choose Options > Send to MIDI > Reset Controllers (or use the corresponding key
command).
This transmits control change message #121, with a value of 0 (reset all controllers), on
all MIDI channels and outputs used by defined instruments. This neutralizes all MIDI
controllers, such as modulation or pitch bends.
To set all MIDI channels to their maximum volume:
m Choose Options > Send to MIDI > Maximum Volume (or use the corresponding key
command).
This transmits a control change message #7 (main volume), with a value of 127, on all
MIDI channels and outputs used by defined instruments.
To send all program, volume, and pan settings from all external MIDI instrument
Parameter boxes:
m Choose Options > Send to MIDI > Used Instrument MIDI Settings (or use the
corresponding key command).
This resets your sound sources, if unexpected program changes occur mid-
performance.
To automatically send instrument settings after loading a project:
m Turn on the “Send After Loading Project: Used Instrument MIDI Settings” option, in the
File > Project Settings > MIDI > General tab.