Manualshelf

Data Sheet

ManualsBrandsArduCAM ManualsArduino KitsUCTRONICS Primary Starter Learning Kit for Arduino UNO
11121314151617181920
20
Lesson 3 Digital Inputs-Switches
Overview
In this lesson, you will master how to use buttons with digital inputs to turn LED on and off.
Components Required
Name Qty Name Qty
UNO R3 or MEGA 2560 1 220Ω Resistor 1
5mm Red LED 1 DuPont Wire 7
Push Switches 2 Breadboard 1
Component Introduction
The switch is a simple component. When you press a button or flip a lever, they
connect two contacts together so that electricity can flow through them.
Actually, there are only really two electrical connections. Inside the switch
package, pins B and C are connected together as same as pins A and D.
Wiring Diagram
Result
Press the left button, the LED will be lit, and press the right button, LED will be extinguished.