User's Guide

53
Figure 43. Direct Channel Entry Screen
Preset (A, B, C)
The unit has the capability of storing three sets of 10 preassigned
channels for a total of 30 preassigned channels. To assign a channel to
a number button, tune in the desired channel and hold down the desired
number button until the unit signals acceptance by issuing one short
beep and displaying a screen to confirm for about 1 second.
Numbered Buttons 0-9
The numbered buttons (0 through 9) provide the operator with a means
of selecting channels by entering the channel number when the unit is
set to DIRECT, or selecting preassigned channels when the unit is set to
operate in PRESET (A, B, C).
Direct
When the unit is set to operate in this mode, channel selection can be
accomplished by entering its number directly. (e.g., to select #23, press
23.) The unit will display the following screen and change to the desired
channel 2 seconds later.
Menu Options