Troubleshooting guide

iNetVu Troubleshooting Guide
C-COM Satellite Systems Inc.
Page 54 of 88
To verify functionality:
1. Reconnect the sensor cable.
2. On the Controls Menu ensure that there are no red indicators flashing.
3. Proceed to the Maintenance Screen and ensure the Platform Type, Ver. and Serial Number is
correct for your configuration.
4. Proceed to the Azimuth Tab.
5. Ensure there is sufficient clearance for the dish to move and rotate.
6. Click Calibrate AZ.
7. When Calibration process is complete Stow the Dish.
8. If the Calibration or Stow fails please contact C-COM Technical Support.