Reference Guide

512
Inspectors
Track Inspector overview
Solo When enabled, solos the track. x x x x
Arm for
recording
When enabled, arms the track for audio
recording.
x x x
Input echo Turns input monitoring on or off. x x x
Waveform
Preview
Display the waveform of the audio that’s
flowing through the bus.
x
Pan The stereo distribution of the output,
ranging from 100% left (hard left) to 100%
right (hard right); a value of “C” indicates
sound that is centered left-to-right. On
stereo tracks, pan acts as balance.
xxx x
Volume The current volume level for the track,
ranging from -INF (silent) to +6 dB
(maximum volume). The recording and
playback levels are displayed in the
Playback and Record meters.
x x x x x
Meter The recording and playback levels are
displayed in the Playback and Record
meters. For MIDI tracks, the meter shows
MIDI activity and velocity.
xxx xx
Track icon Track icons allow you to quickly identify a
track’s contents by instrument. You can
assign a new track icon, create your own
track icons, and save an icon as part of a
track template.
x x x x x
Track number A sequential track number used for
reference.
xxx x
Track name A name that you assign the track for easy
reference. Note that if you do not assign a
name to a track, the default name is the
track number. This track number will
change if you change the order of your
tracks. You can click the Track Name
control to select any available track, bus or
main to display in the Track Inspector.
x x x x x
Input The input source for the track, used in
recording.
xx
Output The output bus through which the track is
played.
x x x x
Control Description
Audio
track
MIDI
track
Instrument
track
Bus Main
Table 112. Track Inspector controls (Continued)