Reference Guide

1230 External devices
Cakewalk Generic Surface plug-in
Global Parameters
This section let's you assign buttons and knobs to control SONAR’s transport. The parameters you
can control are:
• Play
• Stop
• Forward >>
• Rewind <<
• Record
• Write Automation
• Jog <- (previous measure)
• Jog -> (next measure)
• Move 1 Left. This parameter changes the currently-controlled track to the next lower-numbered
track.
• Move Bank Left. This parameter changes the currently-controlled bank of tracks to the next
lower-numbered bank of tracks.
• Move 1 Right. This parameter changes the currently-controlled track to the next higher-
numbered track.
• Move Bank Right. This parameter changes the currently-controlled bank of tracks to the next
higher-numbered bank of tracks.
Presets
After you have carefully configured the Cakewalk Generic Surface property page to work with your
control surface, you will likely want to save the configuration as a preset.
To save a preset
• Type a name in the Preset box, then click the Save (floppy disk) button.