Reference Guide

287
Loop recording
Recording
4. Choose to stack all takes in a single track or to store them in separate tracks.
5. If you choose to stack all takes in a single track, choose either Sound on Sound or Overwrite
mode.
If you use single track and Sound on Sound with Track Lanes enabled, selecting the Create New
Lane on Overlap check box will create another Take lane if your new clip overlaps an existing
clip.
6. If you stack all takes in a single track, you can audition them later by using the Expand/collapse
Take Lanes button in the bottom left corner of the Track pane (each take will have its own
Mute and Solo buttons).
7. Click OK to close the Preferences dialog box, and set the Now time to the point in the project
where you want to start recording.
8. Click or press R. If your metronome count-in is turned on, it will play the count-in measure.
9. Play or perform the material you want to record. At the end of the loop, SONAR will return to the
start of the loop and you can record the next take.
10. Click or press the SPACEBAR when you want to stop recording.
The takes are stored in the manner you requested.