Reference Guide

359
Markers and the snap grid
Arranging and editing
To add a marker
1. Open the Markers dialog box in one of the following ways:
• Click in the Control Bar’s Markers module.
• Press M.
• Choose Project > Insert Marker.
• Click in the Markers view.
• Hold down the CTRL key and click the marker section of the Time Ruler.
• Right-click in the Time Ruler and select Insert Marker.
SONAR displays the Marker dialog box.
Figure 85. The Marker dialog
2. Enter a name for the marker in the Name box.
3. The time is set to the Now time. If you want, use the spinners to change the time or type in a new
marker time.
4. Check the Locked to SMPTE box if you want to lock the marker to the SMPTE time.
5. Click OK.
SONAR adds the marker and displays it in the Time Ruler, the Markers view, and the Control Bar’s
Markers module.
To add a marker on the fly
• Click in the Control Bar’s Markers module, or press M.
SONAR adds a marker at the Now time and displays it in the Time Ruler, the Markers view, and the
Markers module.