Specifications

show interface
GigabitEthernet 0/X (where X is 1, 2, or 3) and show controllers GigabitEthernet 0/1
show interface
show controller
interface. For example, it shows the detected link status, speed, and duplex, and also determines the
current status of autonegotiation and the link partners’ abilities (if it is an autonegotiation-capable
show controller
show controller
clear interface GigabitEthernet 0/X
clear counters GigabitEthernet 0/X
Configuring ATM Interfaces
Step 1
1.1.1.10
Class C network is 1.1.1.0, 0 subnet bits; mask is /24