Manual Chapter 1

3-29
Screen/Print Key
If you select File, the information from the analyzer is sent directly to
a Virprint file.
If you select File and Screen, the information from the analyzer is sent
directly to both the computer screen and a Virprint file.
6. ··Select the serial port you connected the Model 639 Communications
cable to. COM 1 is the default setting.
7.···In the analyzer, either press the Print key to print a pre-defined report
or select the desired screen and press the Alt/Print key to get a screen
print of that specific screen. Once the printing operation is started the
Virtual Printer program will display the message “Capturing Data.”
8. ··Once the information is captured, the Virtual Printer program has
control of the information from the analyzer. The information can be
printed by selecting “Print” under File (use “Printer Setup” under
File to select the printer) or saved to a Virprint file by selecting
“Save” under File.
If additional information is to be printed from the analyzer, repeat the steps
starting from step 6. For more detailed information on the Virtual Printer
program, consult the Virtual Printer User’s Manual.