Manual Chapter 1

1-13
Installing the Application
Caution!
Reloading firmware will erase all data stored in the analyzer. Verify
that no essential data are in the analyzer before proceeding to reload
firmware.
Note
Firmware and application version 2.40 require version 6.0 or
later ROM to load into the UltraSpec analyzer. For more infor-
mation, contact CSI Customer Support.
Note
Firmware and application versions others than 2.40 and later
are not interchangeable with 2.40 and later firmware and appli-
cations and cannot be loaded into the UltraSpec analyzer
together.
Note
The UltraSpec firmware and applications are serialized for the
UltraSpec analyzer and can only be loaded into the UltraSpec
analyzer with that serial number.
Download Procedure
The following flowchart is an abbreviated version of the download proce-
dure. For a thorough explanation, refer to the “DOS Download Procedure”
on page 1-16 or the “Windows Download Procedure” on page 1-22.