Manual Chapter 1

2-11
UltraSpec Analyzer Front Panel
• Advances to the next page on menus that contain more than one
page.
• In Notes, the Page Down function moves forward six notes at a time
within a section.
• Pressing the Alt/Page Down key in the Tolerance Charts will expand
the scale to fit all readings on the graph equally.
(Laser Alignment pro-
gram only.)
• Advances to additional detailed information (e.g., sine curve, align-
ment data, individual tolerance plots with all readings, etc.) from the
dual tolerance plot screen under View Data.
(Laser Alignment program
only.)
Insert
• Formerly known as the Insert/Delete function.
• Inserts alphanumeric characters.
• Undeletes a point or angle and refits curve when editing a sine curve.
(Laser Alignment program only.)
Delete
• Formerly known as the Clear function.
• Deletes alphanumeric characters.
• Alt/Delete clears alphanumeric entries from text fields and the
notepad.
• Pressing the Alt/Delete key while in the Main menu allows deletion
of the current job or reading and notes in the current job.
• Pressing Alt/Delete while acquiring data clears magnitude and phase
averages and begins a new average.
(Balance and Analyze programs
only.)
• Deletes a point or angle and refits curve when editing a sine curve.
(Laser Alignment program only.)
• When editing a sine curve, press the Alt/Delete key undeletes all
points or angles (36 maximum) and refits curve.
(Laser Alignment pro-
gram only.)
Insert
Delete