Manual Chapter 5

9-4 System Maintenance and Troubleshooting
UltraSpec Analyzer Battery Maintenance
UltraSpec Analyzer Battery
A rechargeable battery pack is used to power the UltraSpec analyzer.
Before using the analyzer, verify that the battery has enough charge to
operate properly.
The battery needs to be recharged if:
• The analyzer will not power up; or
• The analyzer displays a low battery warning and turns itself off.
Continuous Battery Operation Length
With a fully charged battery, the UltraSpec 8000 analyzer will operate con-
tinuously for at least ten hours and the UltraSpec 8117 will operate contin-
uously for at least eight hours. The actual time between recharge cycles can
be increased by turning the analyzer off when not in use.