Manual Chapter 5
9-12 System Maintenance and Troubleshooting
8215/8225 Fixtures General Maintenance
Care and Handling
To ensure satisfactory service from this system, follow these procedures:
• Keep the mounting base and chain mounting posts lightly oiled to
prevent them from corroding.
• To maintain repeatability and accuracy, avoid dropping fixture
items. Refer to the Customer Assistance section for repair, update,
and calibration.
• Do not subject system items to large temperature swings.
• Do not engrave on the sensor heads.
• Keep all lens free of grease, dirt, oil, and other smudges.
• Clean the laser and target lens with a soft, lint-free cloth and standard
lens cleaning solution (a field size cleaner container is available from
CSI). Never use an organic solvent such as a thinner or benzine.
• Store laser heads in the carrying case when not in use.
Calibration
The Model 8215/8225 calibration should be checked every two years.
Return the sensor heads to CSI for a calibration check. All calibrations are
NIST traceable.