Quick Reference Guide

Example 1:

A:>syscfg --devseq

The following devices are set in the disk device

sequence:

Device 1:* hdd.emb.0 - System BIOS boot devices

Device 2:* scsiraid.slot.3 - PERC 5/E Adapter(bus

02 dev 02)

Device 3:* usbkey.slot.0 - Hard-disk-emulated USB

flash drive

Example 2:

A:>syscfg --devseq= hdd.emb.1,scsiraid.emb.1

The following devices are set in the disk device

sequence:

Device 1:* hdd.emb.0 - System BIOS boot devices

Device 2:* scsiraid.emb.1 - AIC-7899, A:00 Seagate

NOTE: The asterisk indicates that the device is enabled in the

BIOS.

Applicable Systems

All PowerEdge systems.

Boot Settings

You can manage the boot settings using the options in this group.

--BootMode/--bootmode

Valid Arguments

• On systems prior to 12G

: uefi, bios

• On 12G and later systems

: Uefi, Bios

Description

Determines the boot mode of the system. Allows booting to Unified

Extensible Firmware Interface (UEFI) -capable operating systems or

ensures compatibility with operating systems that do not support

UEFI.

NOTE: If boot mode is modified, reboot the system before

executing the OS installation scripts.

Example:

A:>syscfg --bootmode=uefi

bootmode=uefi

Applicable Systems All PowerEdge 11G and later systems

--BootSeqRetry/--bootseqretry

Valid Arguments

• On systems prior to 12G