Software Suite for Oracle Instruction Manual

9.5
Verifying Remote Copy Settings
Recovery Manager for Oracle User’s Guide
9.3 Verifying Remote Copy Settings
9.3.1 Verifying the Primary/Local Remote Copy Setting
To verify the primary/local Remote Copy setting:
1 Log in to the primary host as root user.
2 Connect to the primary/local InServ Storage Server from the primary host using either SSH
or RSH:
where:
◆ <username> is the InServ Storage Server user.
◆ <ss_name> is the system name of the primary/local InServ Storage Server, which is
attached to the primary host.
◆ You are not prompted for a password if set up correctly.
3 Verify the Remote Copy ports.
The following is sample output from the
showport -rcip command:
4 Verify the Remote Copy primary/local group (datafile group and archive log group).
<primary_host># ssh <username>@<ss_name>
cli% showport -rcip
NOTE: Ensure the ports are in the ready state.
N:S:P State HW Address IP Address Netmask Gateway MTU
0:5:1 ready 0002B3C03DF2 193.1.1.1 255.255.255.0 - 1500
1:5:1 ready 0002B3C03E94 194.1.1.1 255.255.255.0 - 1500
cli% showrcopy groups <group name>