Command Reference Guide

dismissrcopyvv
DESCRIPTION
The dismissrcopyvv command removes a virtual volume from a Remote Copy volume group.
SYNTAX
dismissrcopyvv [option] [<pattern>] <VV_name> <group_name>
AUTHORITY
• Super, Edit
• Any role granted the rcopyvv_dismiss right.
NOTE: You need access to the domain of the specified group (<group_name>) in order to run
this command.
OPTIONS
-f
Does not ask for confirmation for the dismissrcopyvv command.
-pat
Specifies that specified patterns are treated as glob-style patterns and that all Remote Copy volumes
matching the specified pattern will be dismissed from the Remote Copy group. This option must
be used if the <pattern> specifier is used.
-keepsnap
Specifies that the local volume's resync snapshot should be retained. The retained snapshot will
reflect the state of the secondary volume and may be used as the starting snapshot should the
volume be readmitted to a Remote Copy group. The snapshot name will begin with “sv.rcpy”.
-removevv
Remove remote sides' volumes.
SPECIFIERS
<VV_name>
The name of the volume to be removed. Volumes are added to a group with the admitrcopyvv
command.
<group_name>
The name of the group that currently includes the virtual volume.
<pattern>
Specifies a glob-style pattern. This specifier can be repeated to dismiss multiple Remote Copy
volumes. If this specifier is not used, the <VV_name> specifier must be used.
RESTRICTIONS
• This command requires the HP 3PAR Remote Copy license. Contact your local service provider
for more information.
• A volume cannot be removed from a group that is not currently stopped.
168 Dismiss Commands