DSM/SCM Event Management Programming Manual

Event Messages
DSM/SCM Event Management Programming Manual—529844-003
5-199
5280 ZPHI-EVT-PLACE-ALL-DISABLED
ZPHI-TKN-INT-FILE-NM
is the file that contains an invalid alternate key file reference.
Cause. DSM/SCM received error 21 from the File Utility Program (FUP) when
attempting to copy (DUP) this file. The file has an incorrect alternate key attribute.
Effect. The activity stops in a restartable state.
Recovery. Correct the alternate key file name referenced in the specified file and
restart the activity.
5280 ZPHI-EVT-PLACE-ALL-DISABLED
The Place All Files option selected for the Apply has been disabled. Only changed files
are placed.
Cause. The Place All Files option could not be used because no historical information
was in the database. The DSM/SCM version used to apply the current or previous
configuration was prior to T6031AAO. This historical information in the database was
not produced until the introduction of T6031AAO. For more information on the Place All
Files option, see the DSM/SCM User’s Guide.
Effect. The Apply completes with warnings. Only changed files are placed.
Recovery. Informational message only; no corrective action is needed. The Place All
Files option works with future applied configurations as long as the next two
configurations are not backed out.
Tokens
There are no tokens for this message.
Message Text
WARNING: Insufficient information to process the Place All
Files option. The Place All Files option has been disabled.
The normal default behavior of placing only changed files
will be enabled. The current and previous configuration must
be applied on the system by an T6031AAO or later before the
Place All Files option can be used.