DSM/SCM Event Management Programming Manual

BACKUP Errors
DSM/SCM Event Management Programming Manual—529844-003
C-2
7522 Tape verify found problem with ending volume label.
7523 Tape verify found different number of data blocks than were supposed to
have been written.
7524 Tape verify found file label problem.
7525 Tape verify found data block problem.
7526 Tape verify found beginning volume label does not match what was
supposed to have been written.
7527 System image tape too short.
7528 Not a BACKUP tape (bad label identifier).
7529 Not a BACKUP tape.
7530 Wrong tape mounted.
7531 Bad beginning volume label for system image tape.
7532 Bad tape sequence number value.
7533 Out of sequence tape record.
7534 Not from the same BACKUP tape set.
7535 Bad tape format (Too many data blocks found for file on tape).
7536 Bad tape format (Data block too long for file).
7537 Bad tape format (Data block too short for file).
7538 Data block is too long for this BACKUP tape.
7539 Bad tape format (Did not find ending volume label after tape mark for
continued file).
7540 First tape must be mounted.
7541 Tape drive does not support streaming selection.
7542 Cannot turn on tape buffering due to insufficient I/O buffer space.
Table C-1. BACKUP Errors (page 2 of 2)
Error Number Text Description of Error