OSM Service Connection User's Guide (G06.30+)

SSAC (SCSI SAC)
Attributes
Actions
The SCSI SAC (ServerNet addressable controller) is a SCSI plug-in card mounted on these devices:
Processor multifunction 2 (PMF2) CRU (external SCSI controller, SAC 3)●
I/O multifunction (IOMF2) 2 CRU (external SCSI controller, SAC 3)●
ServerNet/DA CRU (There can be up to four SCSI SACs on each ServerNet/DA CRU.)●
SCSI SACs are used for connecting external SCSI devices such as tape drives.
Location in OSM Tree: System > Group > Module > IOMF2 > SSAC
Example: SSAC (1.1.50.3)
Attributes
SSAC
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK. Values
Physical
Type
The type of CRU this SAC is connected to.
values: SSAC, FSAC, SCSI
Part Number
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
Track ID
A unique serial number that identifies the component. Track IDs are used for
tracking components.
Hardware Revision
A code that identifies the generation of the component. Hardware revision
codes are used for tracking components.
Logical
Configured Type
The type of device supported by this SAC.
Values: Disk, Tape, SCSI Controller, Not Configured, Unknown