HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 CLI Reference Guide

DescriptionStatusParameter name
Filter for selecting a logical unit
Available values are ALL, ASSIGNED, FREE, UNASSIGNED, and
RESERVED.
Omit this parameter or specify ALL to display information about
all the logical units.
Specify ASSIGNED to display information about the logical units
that have an assigned LUN.
Specify FREE to display information about logical units that do
not have an assigned LUN.
Specify UNASSIGNED to display information about the logical
units to which Device Manager can assign a LUN, from among
the logical units that do not have an assigned LUN.
Specify RESERVED to display information about the logical units
to which Device Manager cannot assign a LUN, from among the
logical units that do not have an assigned LUN.
Optional
lufilter
Filter for selecting a logical unit
Specify the object ID of the LDEV.
Only the logical units corresponding to the LDEV of the specified
object ID are returned. Specify the object ID obtained from another
CLI response. The value is encoded by the CLI.
Optional
lufilterchil-
did
Specific information about the logical unit
The values you can specify are Path, LDEV, and
VolumeConnection. If you specify multiple values at the same
time, separate values by commas.
Optional
lusubinfo
Object ID of the logical unit
Specify this parameter when you want to obtain information about
a specific logical unit. If you specify this parameter, you must also
specify the model and serialnum parameters. If you specify
the model and serialnum parameters, and omit the objectid
parameter, information about logical units in the specified storage
system is obtained. Specify the object ID obtained from another
CLI response. The value is encoded by the CLI.
Optional
objectid
Specific information about the logical unit path
The value you can specify is HostInfo or WWN.
If you specify this parameter, you must also specify
lusubinfo=Path.
Optional
pathsubinfo
Information about the LDEV
You can specify VolumeConnection or VLDEV. To specify
multiple values at the same time, separate each value with a
comma.
You can specify VLDEV only for P9500 with a microcode version
of 70-03-30-XX/XX or later.
If you specify this parameter, you must also specify the
lusubinfo=LDEV.
Optional
ldevsubinfo
Command reference164