Owner manual

AM456-9026A HP VMA SAN Gateway User’s Guide 187
The show media command is an alias for show media [block] id all command.
Show LUNs Reserved
show luns reserved
Displays list of reserved LUNs
Display All Media Devices
show media all
Display all media devices installed in a HP VMA SAN Gateway. This command shows a summary
line for each device location, giving the size and status of the installed media device. Those media
which are usable as caching or block storage media will have values displayed for
Media ID and
Model; otherwise those parameters will display a string of three hyphens (---).
show media all [block] id all
Display the location, media ID, model, size, and status (online/offline) of all block storage or
caching media.
show media [block] id <id>
Display information about a specified media device installed in a HP VMA SAN Gateway. This
command displays a summary line for each storage media location, giving the size and status of the
device. If it is usable as caching or block storage media, values are displayed for
Media ID and
Model; otherwise those parameters will be a string of three hyphens (---). The <id> can be found
in the output of the
show media all or show media [block] id all command.
Display All Cluster Devices
show media global
show media [block] id all global
show media all global
show media [block] id <id> global
Display the same information as for a single HP VMA SAN Gateway, for every HP VMA SAN
Gateway in the cluster. Gateway IDs are labeled
Module <#> in the display.
The
show media global command is an alias for show media [block] id all global. To
include non-storage media, use
show media all global (or show media global all). The
health and detail options can also be used in combination with the global option, in any order.