Manual

ManualsBrandsIEI Integration ManualsComputer AccessoriesEBC-3000

EBC-3000 IEI Technology Corp. Page 1

Quick Installation Guide

EBC-3000

Mini-ITX Chassis for High Power

Consumption Applications

Version: 1.0

ABOUT

The EBC-3000EBC-3000 is designed for Mini-ITX motherboards. The

front panel includes spaces for an I/O interface panel and optional I/O

ports. One HDD drive may be installed.

Figure 1: Chassis Front Panel

SPECIFICATIONS

Specifications EBC-3000-R10

SBC Form Factor Mini-ITX

Drive Bays One 3.5” HDD

System Cooling fan One 6cm fan

I/O Ports Depends on SBC

Indicators Power, HDD LED

Buttons Power, Reset

Chassis construction Heavy duty metal with plastic front panel

Color Black

Mounting Desktop, wall mount

Operating

temperature

0°C~40°C (*Operating temperature is

determined by system thermal test

running with KINO-9654G4,Pentium IV

3.4GHz processor 651 and 2GB DDR2

RAM.)

Operating humidity 10% ~90%

EMC/Safety CE, FCC class A

Weight (Net/Gross) 2.5Kg / 3.9Kg

Dimensions (DxWxH) 230 mm x 280 mm x 88 mm

Table 1: Specifications

COMPATIBLE SBC/COOLING KIT

Compatible SBC Recommended cooling kits

KINO-9654G4 CF-520-RS, CF-775B-RS

KINO-9454 CF-520-RS, CF-775B-RS

KINO-9652 CF-479B-RS

KINO-9453 CF-479B-RS

KINO-9452 CF-479B-RS

KINO-690AM2 CF-AM2-RS

KINO-761AM2 CF-AM2-RS

Table 2: Compatible SBC and Cooling Kit

POWER SUPPLY SPECIFICATIONS

The EBC-3000 embedded chassis is shipped with a power supply. The

specifications for each option are listed below.

Summary of content (7 pages)

PAGE 1
EBC-3000 Mini-ITX Chassis for High Power Consumption Applications Version: 1.0 Quick Installation Guide Operating humidity ABOUT The EBC-3000EBC-3000 is designed for Mini-ITX motherboards. The front panel includes spaces for an I/O interface panel and optional I/O ports. One HDD drive may be installed. 10% ~90% EMC/Safety CE, FCC class A Weight (Net/Gross) 2.5Kg / 3.
PAGE 2
Specifications ACE-A627A-RS Input Type 90~264 VAC Full Range Output Voltage +3.3 V +5 V +12 V +12 V 2 -12 V +5 Vsb 16 A (0.5 A min) 18 A (0.5 A min) 16 A (1 A min) 10 A (1 A min) 0.8 A (0 A min) 2.5 A (0 A min) Efficiency 80% Temperature Operating : 0˚C ~ 50˚C Storage : -20˚C ~ 80˚C MTBF(hrs) 100,000 hrs Output Connector 20-pin ATX, 4-pin 12 V, FDD and 3 x HDD Dimensions 150 x 81.5 x 40.
PAGE 3
DIMENSION DRAWING Figure 2: Dimension Drawing (measurement in millimeters) EBC-3000 IEI Technology Corp.
PAGE 4
INSTALL I/O BRACKET INSTALLATION STEPS To install the EBC-3000 chassis, the following installation steps must be completed: 1. Remove Chassis Cover 2. Install I/O Bracket 3. Install SBC 4. Install HDD 5. Front Panel Connections 6. Reinstall Chassis Cover 7. Wall Mounting (optional) Note: I/O brackets differ in appearance depending on the SBC model to be installed in the EBC-3000. Step 1: Snap the I/O bracket into place from the inside of the chassis.
PAGE 5
Step 4: Install the bracket with HDD into the chassis by aligning the bracket retention screw holes in the top of the HDD bracket with the retention screw holes on the chassis. Insert the four previously removed retention screws into the top of the HDD bracket (Figure 10). Figure 7: HDD Bracket (Top) Step 2: Attach the HDD to the HDD bracket. Align the retention screw holes in the sides of the bracket with the retention screw holes on the HDD. Insert the retention screws into the bracket as seen below.
PAGE 6
REINSTALL CHASSIS COVER Step 1: Replace chassis cover. Step 2: Reinsert the two retention screws. WALL MOUNTING (OPTIONAL) To mount the embedded system onto a wall using the wall mount bracket kit, please follow the steps below. Step 1: Attach the wall mounting brackets to the chassis with the four bracket retention screws as shown in the figure below.
PAGE 7
Figure 14: Power Supply Bracket Retention Screws Step 5: Replace the power supply. Step 6: Secure the power supply bracket to the power supply and then secure the power supply bracket to the chassis as shown in Figure 14. Step 7: Secure the power supply to the front panel of the chassis with the three screws as indicated in Figure 13. Step 8: Connect the power supply to the SBC according to the SBC user manual. SYSTEM FAN REPLACEMENT To replace the system fan please follow the steps below.