Technical data

User accounts
In the user accounts the setup of the permissions and the alarming is done.
Only if the required user data is entered, a user can control the AlarmManager or request information.
The list describes the user data required for AlarmManager interaction:
Input field
Description
User Password
Login to the ControlCenter, the Web-Interface and the Kentix App
PIN-Code
Remote control by SMS and switching via KeyPad
E-Mail Address
Destination address for the alarming
Phone number
Destination phone number for the alarming. Also used as authentication for the SMS controlling.
Assigned alarm zones
The user can only switch zones assigned to his account. To switch all zones together, every zone has
to be assigned to the user.
Permissions
Assign single permissions for the user by activating the according option.
IMPORTANT!
Only users with the permission „Administrator“ are allowed to make changes to the AlarmManager.
For users without the admin permission, only the tab pages „Dashboard - Logbook - Monitoring“ are
available for viewing purposes.
A login on the web interface is also not permitted.
Page 13 ! ! ! ! (08-2014, subject to change) kentix.de