User's Manual

Digital Hybrid Wireless Belt-Pack Transmitters

Rio Rancho, NM

Battery Installation

The transmitter is powered by two AA batteries. We

recommend using lithium for longest life.

Because some batteries run down quite abruptly, using

the Power LED to verify battery status will not be reli-

able. However, it is possible to track battery status using

the battery timer function available in Lectrosonics

Digital Hybrid Wireless receivers.

The battery door opens by simply unscrewing the

knurled knob part way until the door will rotate. The

door is also easily removed by unscrewing the knob

completely, which is helpful when cleaning the battery

contacts. The battery contacts can be cleaned with

alcohol and a cotton swab, or a clean pencil eraser. Be

sure not to leave any remnants of the cotton swab or

eraser crumbs inside the compartment.

A small pinpoint dab of silver conductive grease* on the

thumbscrew threads can improve battery performance

and operation. Do this if you experience a drop in bat-

tery life or an increase in operating temperature.

Insert the batteries according to the markings on the

back of the housing. If the batteries are inserted incor-

rectly, the door may close but the unit will not operate.

*if you are unable to locate a supplier of this type of

grease - a local electronics shop for example - contact

the factory for a small maintenance vial.