User Manual

79
Figure 31: Module position changed
To apply the changes, click the apply button ( ).
The origin is saved in the module and it can also be modified by editing the
parameters in the module position settings window.
6.3.9. Changing the LeddarVu Module Orientation
The module origin may be rotated to match its physical position. If you do so, the
main window display can better match the physical installation of the module. For
example, if the module is installed above the ground, the origin can be set to reflect
its position.
Use the mouse cursor to point to the top of the segments (the top turns red); click
and drag it in the desired position.