Logic Use's Guide Network Adapter LSI8751D

Detailed Installation Procedure 2-3
2.2.2 Inserting the Host Adapter
For safe and proper installation, check the user’s manual supplied with
your computer and perform the following steps.
Step 1. Ground yourself before handling this host adapter board.
Remove the LSI8751D from the packing and check that it is not
damaged. Figure 2.1 shows an example of this board.
Figure 2.1 Hardware Connections for the LSI8751D
Step 2. Switch off and unplug power cords for all components in your
system.
Step 3. Remove the cabinet cover on your computer to access the PCI
slots.
Caution: Ground yourself by touching a metal surface before
removing the cabinet cover. Static charges on your body
can damage electronic components. Handle plug-in boards
Plug-in HVD Terminator
(Fits J2 or J3)
68-Pin External
SCSI Interface
J3
J1 to PCI
Bus Connector
on Mainboard
LED
Connector
J4
68-Pin High Density
SCSI Interface
J2