User`s guide

Installation, Configuration, and Test Troubleshooting
12-11
xpctest: Test 5 Fails. This error occurs only when the environment variable
settings are out of date.
To correct this, perform the following:
1 At the MATLAB prompt, start xPC Target Explorer. For example,
xpcexplr
2 Inspect the environment variables for the problem target PC.
3 If you have xPC Target Embedded Option installed, ensure that, in the
Target boot mode section, you have selected the BootFloppy option.
4 Make necessary changes.
5 Recreate the boot disk. Perform the following:
a Insert a formatted floppy disk.
b Click Create Bootdisk.
6 Reboot the target PC with the boot disk.
7 Rerun xpctest.
If this procedure does not resolve the issue, perform the following:
1 At the MATLAB command line, type updatexpcenv. For example,
updatexpcenv
2 Recreate the boot disk. Perform the following:
a Insert a formatted floppy disk.
b At the MATLAB window, type
xpcbootdisk
3 Reboot the target PC.
4 Rerun xpctest.