User`s guide
getlog
14-44
14getlog
Purpose Get all or part of output logs from target object
Syntax MATLAB command line
log = getlog(target_object, 'log_name', first_point,
number_samples, decimation)
Arguments
Description Use this function instead of the function get when you want only part of the
data.
Examples To get the first 1000 points in a log,
Out_log = getlog(tg, 'TETLog', 1, 1000)
To get every other point in the output log and plot values,
Output_log = getlog(tg, 'TETLog', 1, ,2)
Time_log = getlog(tg, 'TimeLog', 1, ,2)
plot(Time_log, Output_log)
See Also xPC Target target object method get (target object).
The procedure “Entering the Real-Time Workshop Parameters” on page 3-42.
log
User-defined MATLAB variable.
'log_name'
Values are TimeLog, StateLog, OutputLog, or
TETLog. This argument is required.
first_point
First data point. The logs begin with 1. This
argument is optional. Default is 1.
number_samples
Number of samples after the start time. This
argument is optional. Default is all points in log.
decimation
1 returns all sample points. n returns every nth
sample point. This argument is optional. Default
is 1.