Personal Computer User Manual

Default Settings
http://www.motorola.com/computer/literature 3-21
3
Special PCI Slave Image Register = 00000000?
The configured value is written into the SLSI register of the Universe chip.
Master Control Register = 80C00000?
The configured value is written into the MAST_CTL register of the
Universe chip.
Miscellaneous Control Register = 52060000?
The configured value is written into the MISC_CTL register of the
Universe chip.
User AM Codes = 00000000?
The configured value is written into the USER_AM register of the
Universe chip.
Firmware Command Buffer
Firmware Command Buffer Enable = N?
Firmware Command Buffer Delay = 5?
Defines the number of seconds to wait before firmware begins executing
the startup commands in the startup command buffer. During this delay,
you may press any key to prevent the execution of the startup command
buffer.
The default value of this parameter causes a startup delay of 5 seconds.
Firmware Command Buffer:
['NULL' terminates entry]?
The Firmware Command Buffer contents contain the BUG commands
which are executed upon firmware startup.
BUG commands you place into the command buffer should be typed just
as you enter the commands from the command line.
Y Enables Firmware Command Buffer execution.
N Disables Firmware Command Buffer execution
(Default).