Setup guide

1. Hold your finger on the Touch Strip, beneath where you see the orange dot. The LED strip
above the Touch Strip will now solely indicate the orange dot.
2. Move your finger back to the center position and release it.The X1's Touch Strip has now
been returned to Split Mode.
Take some time to familiarize yourself with switching between these two HotCue modes,
and this intuitive process will soon become an autonomous part of your DJ workflow.
3.4.5 Using the Touch Strip with Scratch Control
If you use turntables to control TRAKTOR's Decks, the X1's Touch Strip in Split Mode or a Sin-
gle Deck mode provides an intuitive tool for:
▪ Nudging or pitchbend adjustments whilst in the mix.
▪ Navigating through tracks using the secondary seek function.
▪ Assigning FX.
▪ Assigning loops.
▪ Refer to ↑5.1.3, FLUX Button in the appendix section of this manual for further informa-
tion.
Refer to the full TRAKTOR manual for further information on using Scratch Control.
3.5 Using the Transport Section (Playback, HotCues, Flux, and Sync
Control)
The transport section of the X1 is located in the bottom third of the device. The left section of
buttons by default controls Deck A in TRAKTOR, and the right side Deck B. Using this trans-
port section you can control:
▪ Playback
Key functions when using the X1 with TRAKTOR
Deck Control
Traktor Kontrol X1 Mk2 - Manual - 21