User's Manual

BX5
23
16. BATTERY AND RECHARGE
16.1. Low battery signal
During its operation, the system alerts the user with a voice message when the battery is low. From the
first message, the system has a 1-hour autonomy. Warning is given every 10 minute.
16.2. Charging the system
To charge the system, hook it up to the battery charger or to a USB outlet powered with the USB-mini
USB cable supplied as standard equipment. The charge will take place as follows:
When you connect the BX5 system to the battery charger, the red LED of the Emergency Stop Light stars
to flash (at a frequency of 10 seconds). When the battery is charged, the LED changes to steady.
PICTURE
BX5 system
turned off
When the BX5 system is connected to the battery charger, the blue LED starts to flash
quickly. When the battery is charged, the blue LED becomes steady.
BX5 system
turned on
When the BX5 system is connected to the battery charger, the blue LED starts to flash
quickly. When the battery is charged, the blue LED goes back to its standard flashing.
N.B.: If the device has not been charged for a long time (a few months), it may not be possible to turn on
the system during the first few minutes of the charging, as the voltage may drop below the minimum
limit.