User Guide

56 Other Installation Options
Other Installation Options
103-000143-001
August 30, 2001
Novell Confidential
Manual 99a38 July 17, 2001
[NWI:Volume n] Section
Volume Name = <string>
Volume Type = <string>
Example [NWI:Volume 0]
Description This section can be included for each volume defined on the
server. Note that SYS must be Volume 0. This section allows
volumes to be created on specific partitions in the system
during installation. The partitions are specified by the key
entries in the section. The zero-based sequence number (n
= 0, 1, 2, 3, ...) in the section heading specifies the order in
which the volumes are created. Volume SYS must be
defined in [NWI:Volume 0].
Default (none)
Values (valid volume name)
Key Required Yes
Example Volume Name = DATA
Purpose Identifies the name of the volume; follows naming
convention found in the NetWare user documentation.
Default NSS
Values NetWare or NSS or Free
Key Required No
Example Volume Type = NSS
Purpose Specifies the type of the volume to be created. Note that
volume types must be created on like partition types (e.g.,
NSS volume on NSS partition).