User Guide

46 Novell Storage Services Administration Guide
Novell Storage Services Administration Guide
103-000141-001
August 30, 2001
Novell Confidential
Manual 99a38 July 17, 2001
8
Click Modify.
9 Enter or edit the user space amount in the Limit field and click OK.
Setting Up Directory Space Restrictions
You can limit the amount of space occupied by a directory and the files it
contains.
1 Open ConsoleOne.
2 Right-click on the directory you want.
3 Click Properties and then Facts.
4 Select Restrict Size.
5 Enter the amount you want to limit the size to and click Apply.
6 Click Close.
Mounting a Logical Volume
After you set up and configure logical volumes, you can mount them.
1 From ConsoleOne, open the tree you want.
2 Right-click the server object and select Properties.
3 Click Media > NSS Logical Volumes.
4 Choose the logical volume you want to mount and click Mount.
Deactivating/Activating NSS Pools and Volumes
You might need to temporarily restrict user access to a storage pool or volume.
Instead of bringing down the server, you only need to deactivate the specific
volume or pool. You can deactivate both storage pools and volumes; however,
you can only do maintenance (rebuild and verify) on storage pools. This
means that users will be unable to access any of the volumes in the pool while
you run REBUILD and VERIFY. When you use REBUILD and VERIFY a
log file is generated to the root of the DOS drive. For instructions on running
REBUILD and VERIFY, see “Rebuilding NSS Storage Pools and Volumes”
on page 48.
1 From ConsoleOne, open the tree you want.