User Guide

44 Traditional File Services Administration Guide
Traditional File Services Administration Guide
103-000180-001
August 30, 2001
Novell Confidential
Manual 99a38 July 17, 2001
 Check how much space remains on volume SYS:. If it is low, increase the
size by adding free space.
To increase the amount of free space, do one or more of the following:
 Delete extraneous files (if you can log in from a workstation).
 Enter SET IMMEDIATE PURGE OF DELETED FILES = ON at the
console prompt and then retry the action.
 If you have an additional disk, increase the size of the volume by creating
an additional segment of the volume on the disk.
Resolving Volume I/O Errors
To resolve a volume I/O errors on traditional volumes, try one or more of the
following:
 Make sure that all devices that contain the volume are online. (Volumes
can span multiple devices.)
 Repair the volume using VREPAIR.
 Make sure that the volume is visible.
If you have tried all of the above without success, contact a Novell Support
Provider or the disk drive manufacturer.
Resolving Problems When the Server Hangs after
Mounting Last Volume
To diagnose problems when the server stops processing after mounting the last
volume, identify whether the following conditions exist:
 The server network board is not initializing when the server is started
because the board is not installed or seated correctly.
 The server network board is not configured correctly.
To resolve problems when the server stops processing after mounting the last
volume, perform the following actions or ensure that the following conditions
exist:
 Check the network board configurations of the boards in the server and
the settings shown on the server and make sure that the settings match.