User Guide

Novell Cluster Services Overview and Installation
Novell Cluster Services Overview and Installation
103-000154-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Check the Master Only check box to ensure the resource runs only on the
master node in the cluster.
If the master node in the cluster fails, the resource will fail over to
whichever node becomes the master.
Click Apply to save changes.
Using NetWare Remote Manager
On the left column under the Clustering section, click Cluster Config.
From the list of Resources, select the desired resource.
On the Resource Information screen, click Policies.
Check or uncheck the Ignore Quorum check box as desired.
See the instructions above on setting resource Start, Failover, and
Failback modes using ConsoleOne for more details.
Select the Start, Failover, and Failback modes for this resource.
Check or uncheck the Master Only check box.
If the Master Only box is checked, the resource will run only on the server
designated as the Master node in the cluster.
Click Apply.
Assign Nodes to a Resource
When you create a resource on a cluster or cluster enable a volume or pool,
the nodes in the cluster are automatically assigned to the resource or the
volume or pool. The order of assignment is the order the nodes appear in the
resource list. You can assign or unassign nodes to the resource or the volume
or pool, or change the failover order.
Using ConsoleOne
Select the Nodes tab on the resource property page.
From the list of unassigned nodes, select the server you want the resource
assigned to and click the Right-arrow button to move the selected server
to the Assigned Nodes list.
Repeat this step for all servers you want assigned to the resource. You can
also use the Left-arrow button to unassign servers from the resource.