User Guide

Setting Up 59
Storage Management Services Administration Guide
103-000134-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Backing Up a Workstation
To back up the workstation (the target), a Target Service Agent (TSA) must
be loaded on the workstation. (See “Loading the Target Service Agents” on
page 45.)
You can select the directories to back up or back up the entire workstation.
Windows 95 and 98 Workstation
Make sure that the W95TSA is installed and configured. It is a part of the
Novell Client modules (checkbox for Target Service Agent).
NOTE: If W95TSA is installed and registered, a shield-like icon appears in the
system tray and indicates Novell TSA (Listening) message. You will also see an
SMS screen popup when you log in to NetWare.
1 At the target workstation, register with the W95TSA.
1a Double-click the shield-like icon that appears in the system tray.
The Novell Target Service Agent for Windows Properties box
appears.
1b Enter your user name and password for TSA.
1c Enter the server name that will be servicing this Windows client.
1d Select the disk drive you want to register.
1e (Recommended) Check Auto Register. This automatically registers
your workstation with the server after you restart.
1f Click OK.
1g Restart your workstation.
The TSA must be installed and registered with the host server, along with
the TSA username and password.
2 At the host server, load TSAPROXY.
3 Select the NetWare server running the target service agent.
4 Follow the procedure from Step 3 on page 50 to complete your backup.