User Guide

Setting Up 77
Storage Management Services Administration Guide
103-000134-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
3
Press Insert and enter the name space for the name space format you used
when entering the file or directory name.
The name space allows SBCON to correctly interpret the path
information entered earlier in this menu in either the directory field or the
location field.
IMPORTANT: If files are restored to a new location, the name spaces must be the
same or an error message will occur.
You can restore to a new location only in the name space that is supported
by the drive to which you are restoring.
The supported name spaces are DOS, FTAM, Macintosh, NFS, and long.
SBCON provides a list of the name spaces currently loaded on the target
to which you are restoring.
For example, if you are restoring to a new Macintosh location, enter a
path, (for example, SYS::test:monday) and then enter Macintosh
as your name space.
4 (Optional) Restore to a new location (located in Rename Data Sets).
4a Enter the source path, including the volume name, to the target
directory (a location different from where the data was backed up).
Enter Volume:/directory/directory
4b If the new location you are restoring to is a different NetWare server,
do the following:
1. Back up the data from the server where it resides.
2. Exit to the Main Menu.
3. Change your target to the server you want to restore the data to.
See “Changing Your Target” on page 61.
5 Continue through Step 15 on page 65 to Step 19 on page 65.