User's Manual

2. Getting started
Before start using your phone, you need a fully charged battery and a valid SIM
card.
2.1 Insert the Battery & SIM card
1. Look at the back of your phone. Gently press
down the rear cover.
2. Press the battery tab and lift the battery
upward to remove it.
PIC
3. Unlock the SIM card holder by pushing it to
the right and lifting it up Insert the SIM card with
the metallic part facing down and the clipped
corner in the right direction.
4. Gently press down the SIM card holder and
lock it by pushing to the left.
5. Install the battery and rear cover by
reversing the above Steps 2 and 1.
2.2 SIM card
Before using your phone, you must contact a wireless network service provider to
get a personal SIM (Subscriber Identity Module). The
SIM card keeps track of your phone number, the services included in your
subscription, and your personal data such as your phonebook and messages.
The phone is unusable (except for emergency calls) until a valid SIM card is
inserted. Your phone will display a warning message if the SIM card is not
inserted properly.
Please note
z If the phone or the SIM card is lost or stolen, you should contact your service
provider immediately in order to prevent unauthorized use.
Copy SIM Contacts
To copy your SIM contacts to your phone, tap Start
>Programs >SIM contacts >
Copy Now button.
刪除: WF