Data Sheet

Product Dimensions: Width X Height X Depth = 399 mm × 223 mm × 159 mm Weight: 6.2 kg (Without Package)
Bene ts of Rigol's all digital IF design
Unique widescreen display, friendly interface and easy-to-use operations
Auto
Tune
Auto
Range
Auto
Scale
Auto
Couple
Power ON
Last
Factory
Preset
User
Preset
Preset
Status saving and
loading such as
Setup
State
Trace
Corrections
Measure
Marker Table
Peak Table
Limit
1
RIGOL
DSA1000 Series provides a series of automatic setting functions such
as Auto Tune, Auto Range, Auto Scale and Auto Couple that enable the
analyzer to acquire signals and match parameters automatically, instead
of the manual process used by a traditional analyzer. In addition, the User
and Factory settings under the Preset function enable users to quickly and
easily recall previous measurement settings.
With the DSA1000 Series get a high quality spectrum analyzer without the
price tag. This lowers the investment whether you are in stages related
to research and development or manufacturing and maintenance. Don't
let instrumentation costs dictate resource allocation. With our available
calibration and maintenance training as well as firmware updates never
regret a purchase because of total cost of ownership.
1. The ability to measure smaller signals: on the basis of this technology,
the IF  lter enables smaller bandwidth settings, which greatly reduce the
displayed average noise level.
2. The ability to distinguish between small signals by frequency: using the
IF  lter with the smallest bandwidth setting it is possible to make out
signals with a frequency difference of only 10 Hz.
3. High precision amplitude readings: this technology almost eliminates
the errors generated by  lter switching, reference level uncertainty,
scale distortion, as well as errors produced in the process of switching
between logarithmic and linear display of amplitude when using a
traditional analog IF design.
4. Higher reliability: compared with traditional analog designs, the digital
IF greatly reduces the complexity of the hardware, the system instability
caused by channel aging, and the temperature sensitivity that can
contribute to parts failure.
5. High measurement speed: the use of digital IF technology improves the
bandwidth precision and selectivity of the  lter, minimizing the scanning
time and improving the speed of the measurement.
Breadth of measurement functions and
automatic settings provide ultimate fl exibility
Incomparable Value
Advanced Performance and stability
Stability and precision is the primary design goal of the DSA1000 Series.
We started with an all digital IF core. With the minimum 10Hz resolution
bandwidth, -88 dBc/Hz phase noise (typical) at 10 kHz offset, up to -148
dBm displayed average noise level (10 Hz RBW, standard preampli er on)
and less than 1.0 dB total amplitude error, the DSA1000 Series makes high
precision measurements easier than ever whether the application calls for
low noise or narrow resolution.