User Guide

II. Parts of the microscope

III. Assembly and set up

Carefully remove the microscope from the box and set it on a sturdy, flat surface.

Remove the plastic covers from the eyepiece holders on the microscope's head, then

place eyepieces into the holders. You may choose at this time to insert the eyepiece

adapter into the trinocular camera port on the top of the microscope and place either a

third eyepiece into it or mount an eyepiece camera (not included). Locate the power

adapter and attach it to the microscope, then plug it in. Turn the microscope on by

pressing the power button on the back of the base.

IV. Using the microscope

Turn the microscope on and use the illumination intensity control wheel to set the lamp

on the lowest brightness setting.