Multipoint Control Unit Getting Started Guide

Step three: Add endpoints (optional)

One way to add participants to a conference that you create is to have the MCU

automatically call them when the conference starts. To do this, you configure their

endpoints on the MCU. When you set up a conference, you can choose the

endpoints from the

Pre-configured participants list. This is easier than entering

each endpoint’s details every time. Participants that are pre-configured for a

conference will automatically be called by the MCU to join that conference.

To define pre-configured endpoints:

1 In the web interface of the MCU, go to

Endpoints:

To add a H.323 endpoint, click Add H.323

To add a SIP endpoint, click Add SIP

To add a VNC screen, click Add VNC

2 Configure the endpoint settings you require, using the online help for further

assistance.

3Click

Add endpoint.