Algorithm Manual Revision 4

DMix
English Manual – Updated 2018-02-28 147
Cut Filter – Bessel type
Cut Filter – Butterworth type
Freq
Press Freq and use Faders 1 to 3 to adjust the
frequencies for each of the four bands.
►
Range – Lo band: 20 Hz to 20 kHz
►
Range – Mid band: 20 Hz to 20 kHz
►
Range – Hi band: 20 Hz to 40 kHz
Gain
Press Gain and use Faders 1 to 3 to adjust gain
for each of the four EQ bands.
Range for the Parametric, Shelve and Cut type:
►
Lo Gain: -12dB to +12dB
►
Mid Gain: -12dB to +12dB
►
Hi Gain: -12dB to +12dB
Range for the Notch filter:
►
Lo Gain: -100dB to 0dB
►
Mid Gain: -100dB to 0dB
►
Hi Gain: -100dB to 0dB
Type
Press and use Faders 1 to 3 to set BW value for
each of the 4 EQ bands.
Range for the Notch filter:
►
Lo BW: 0.02 to 1 oct
►
Mid BW: 0.02 to 1 oct
►
Hi BW: 0.02 to 1 oct
Range for the Parametric filter:
►
Lo BW: 0.1 to 4 oct
►
Mid BW: 0.1 to 4 oct
►
Hi BW: 0.1 to 4 oct
Range for the Shelve filter:
►
Lo BW: 3 to 12dB/oct
►
Hi BW: 3 to 12dB/oct
Range for the Cut filter:
►
Lo BW: Bessel or Butterworth
►
Hi BW: Bessel or Butterworth
Bandwidth/Q – Key-Values:
►
BW Q
►
0.5 2.87
►
0.7 2.04
►
1.0 1.41
DMix algorithm – 5 band page
DMix algorithm – 5 band page
Xovers
Press this button to access the four cross-over
points between the five-bands. The parameters
are Automatically assigned to faders 1 to 4.