Installation Instructions

25. Indoor humidity high alarm

26. Indoor humidity low alarm

27. Indoor dew point high alarm

28. Indoor dew point low alarm

29. UV Index high alarm

30. Sunlight high alarm

31. Sensor(CH1) Temperature high alarm

32. Sensor(CH1) Temperature low alarm

33. Sensor(CH1) Humidity high alarm

34. Sensor(CH1) Humidity low alarm

35. Sensor(CH1) Heat Index high alarm

36. Sensor(CH1) Heat Index low alarm

37. Sensor(CH1) Dew Point high alarm

38. Sensor(CH1) Dew Point low alarm

Note: To prevent repetitive temperature alarming, there is a 0.5 °C tolerance band. For

example, if you set the high alarm to 26.7 °C and silence the alarm, the alarm icon will

continue to flash until the temperature falls below 26.2°C, at which point, the alarm will

reset and must increase above 26.7 °C to activate again.

Note: To prevent repetitive alarming of humidity, there is a 4% tolerance band in

humidity alarm. For example, if you set the high alarm to 60% and silence the alarm, the

alarm icon will continue to flash until the humidity falls below 56%, at which point, the

alarm will reset and must increase above 60% to activate again.

8.4AlarmandCommandKeyBeeperON/OFFMode

The beeper can be silenced for both alarms and key strokes.

In normal mode, press and hold the ALARM key for three seconds to toggle the beeper on

or off (depending on the current setting).

The BZON (beeper on) or BZOFF (beeper off) icon will appear in the time area for three

seconds. press and hold the ALARM key again for three seconds to toggle the BZON or

BZOFF command.

9.WiFi Connection Status

When the console successfully connects to your Wi-Fi router, the Wi-Fi signal icon

will appear on the LCD display(behind the Outdoor humidity). If the Wi-Fi signal is not

stable or the console is trying to connect to the router, the icon will flash. If the icon

disappears, it means the console is not connected to the Wi-Fi router.

Note: If you own a dual band router (2.4 GHz and 5.0 GHz),make sure you

connect to the 2.4 GHz band, otherwise it will fail to connect the weather station to

WiFi.

10. Time Server Sync Status

After the console has connected to the internet, it will attempt to connect to the internet

time server to obtain the time. Once the connection succeeds and the console’s time has