Installation Instructions
20
2 time and HI alarm parameters of indoor dew point, 24h rainfall, outdoor dew point,
relative pressure and Sensor(CH1) heat index.
Press ALARM key again to view the LOW alarms along with the alarm clock time the
same way HI alarms.
Press the SNOOZE key at any time to return to the normal mode.
8.3SettingtheAlarms
Press ALARM key to enter the alarm mode.
Press and hold the SET/MODE key for three seconds. The first alarm parameter will begin
flashing (alarm hour).
To save the alarm setting and proceed to the next alarm parameter, Press (do not hold) the
SET/MODE key.
To adjust the alarm parameter, press the [+] or [-] key to increase or decrease the alarm
settings, or press and hold the [+] or [-] key for three seconds to increase or decrease the
alarm settings rapidly.
Press the ALARM key to turn on (the alarm icon will appear ) and off the alarm.
Press the SNOOZE key once at any time to return to the normal mode. After 30 seconds of
inactivity, the alarm mode will time out and return to normal mode.
The following is a list of the individual alarm parameters that are set (in order):
1. Alarm hour(alarm 1)
2. Alarm minute(alarm 1)
3. Alarm hour(alarm 2)
4. Alarm minute(alarm 2)
5. Outdoor temperature high alarm
6. Outdoor temperature low alarm
7. Outdoor humidity high alarm
8. Outdoor humidity low alarm
9. Outdoor AT high alarm
10. Outdoor AT low alarm
11. Outdoor dew point high alarm
12. Outdoor dew point low alarm
13. Outdoor feels like high alarm
14. Outdoor feels like low alarm
15. Wind Gust high alarm
16. Wind Average high alarm
17. Rainfall (RATE) high alarm
18. Rainfall (24h) high alarm
19. Absolute pressure high alarm
20. Absolute pressure low alarm
21. Relative pressure high alarm
22. Relative pressure low alarm
23. Indoor temperature high alarm
24. Indoor temperature low alarm