User's Manual
Chrome, Safari, IE, Edge, Firefox, Mozilla or Opera.
5. Line of sight WiFi RF transmission (in open air): 20meter (80 feet)
17.Maintenance
1. Clean the rain gauge once every 3 months
2. Replace the wind, rain and thermo-hygrometer transmitter batteries once every 1-2 years
18TroubleshootingGuide
Problem Solution
Wireless remote not reporting in to
console.
There are dashes (--.-) on the display
console.
If any of the sensor communication is lost, dashes (--.-)
will be displayed on the screen. To reacquire the signal,
press and hold the CHANNEL/+ button for 3 seconds,
choose the lost sensor and press SET button, and the
remote search icon
will be constantly displayed.
Once the signal is reacquired, the remote search icon
will turn off, and the current values will be
displayed.
The maximum line of sight communication range is 100
m and 30 m under most conditions. Move the sensor
assembly closer to the display console.
If the sensor assembly is too close (less than 1.5m), move
the sensor assembly away from the display console.
Make sure the remote sensor LCD display is working
and the transmitter light is flashing once per 60 seconds.
Install a fresh set of batteries in the remote
thermo-hygrometer. For cold weather environments,
install lithium batteries.
Make sure the remote sensors are not transmitting
through solid metal (acts as an RF shield), or earth
barrier (down a hill).
Move the display console around electrical noise
generating devices, such as computers, TVs and other
wireless transmitters or receivers.
Move the remote sensor to a higher location. Move the