Technical data

SET CONFIGURATION INTERFACE
Qualifiers
/ARP
/NOARP
Optional. Default: /ARP.
Enables IP address-to-hardware address (Ethernet or FDDI) mapping.
/ARP is valid when you create an interface but not when you modify an existing
interface.
/AUTO_START
/NOAUTO_START
Optional. Default: /AUTO_START.
Valid for a SLIP or PPP interface. Automatically creates the interface when
TCP/IP Services starts.
/BROADCAST_MASK=IP_address
Optional.
Sets the Internet interface to receive all broadcast messages.
TCP/IP Services calculates the default by the following methods:
• Using the network number
• Setting all bits in the host number field to 1
/C_BROADCAST_MASK=IP_address
Optional.
Sets the cluster broadcast mask to receive all broadcast messages.
The software calculates the default by the following methods:
• Using the network number
• Setting all bits in the host number field to 1
/C_NETWORK=IP_address
Optional.
Sets the network mask of the cluster network. This mask is specific to the cluster
host network.
The software calculates the default by using the following methods:
• Setting the bits representing the network fields to 1
• Setting the bits representing the host field to 0
/CLUSTER=host
/NOCLUSTER
Optional. Default: None.
Specifies the cluster host name (alias host identifier).
Before using this qualifier, first define the same name in the hosts database.
/CLUSTER=host associates the alias host identifier with each interface in a
cluster.
2–98 Command Descriptions