Technical data

SET CONFIGURATION INTERFACE
/NOCLUSTER disables Internet cluster processing on the specified interface.
Caution
When you specify /NOCLUSTER, active communication is aborted for
applications bound to the cluster alias name.
/COMPRESS= {ON | OFF | AUTOMATIC}
Optional. Defaults: For PPP interface, /COMPRESS=ON; for SLIP interface,
/COMPRESS=OFF.
Valid for SLIP and PPP interfaces.
Enables or disables TCP header compression.
/COMPRESS=AUTOMATIC turns off compression unless the remote end begins
to use it.
/DESTINATION=IP_address
Optional.
Valid for a PPP interface.
Used on the local host to provide dialup access to remote systems. The value
specified is the IP address to be given to remote clients for use while the PPP
connection is active. If using /DESTINATION, you must provide the address of
the local host by using the /HOST qualifier.
/DHCP
/NODHCP
Optional.
Designates the interface as a DHCP-controlled interface in the permanent
database.
/FLOWCONTROL
Optional. Default: No flow control.
Valid for a SLIP interface. Enables the handling of XON and XOFF characters
to interoperate properly with modems that are configured to interpret these
characters locally.
Specify /FLOWCONTROL only if the host at the other end of the line is running
TCP/IP Services.
/HOST=host
Required when first setting the interface; optional if the interface is already
defined. Always required for a SLIP interface. Optional for a PPP interface
unless you are setting up the local host as a dialup provider by using the
/DESTINATION qualifier.
Local host name or IP address using the interface. If not specified for a PPP
interface, PPP obtains the correct address from the remote host.
If your host is multihomed, specify an address.
Command Descriptions 2–99