User guide

Running the Array Configuration Utility
Figure 6-16. View Configuration list
For each controller, the drive arrays, logical drives, and physical drives
configured for that controller are listed. Use the Drive View option, located
below the Configuration View box, to select the Physical or Logical view.
Figure 6-16 shows the physical view of an RA4000 in slot 1. Listed below the
controller are two unassigned drives: one 9.1-GB drive and one 4.3-GB drive.
This controller has two drive arrays, Array A and Array B, along with a
number of drives within each array. Array A has an online spare.
When viewing the Configuration View box, selecting an item—a controller, array,
logical drive, or physical drive—will cause the hard drive tray LEDs to blink. Use this
feature to identify a specific physical drive or to identify the external drives attached to a
controller.