User guide
Compaq StorageWorks RAID Array 4000 User Guide
To install the Hot-Pluggable drives into the RA4000:
1. Open the front door of the RA4000 (tower only).
2. Choose the bay location (SCSI ID) of the drive.
3. Refer to the markings on storage system front panel to find the correct
location of the drive tray. Markings for 1.6-inch drives are on the left
(top in rack systems), while 1-inch drives are on the right (bottom). The
1-inch and 1.6-inch drives can be intermixed as long as they conform to
the appropriate front panel markings.
4. Squeeze the latches on the drive tray 1and pivot the ejector levers
into the fully open position 2. Insert the drive into the correct drive bay.
1
1
2
2
Figure 2-7. Opening the latches